User Manual Q&AAnswer
Nov 06, 2024 - 09:18 PM
To pair the YMOO RT5066 wireless audio transmitter and receiver, please follow these steps:
1. Make sure both the transmitter and receiver are powered on and within range of each other.
2. On the transmitter, locate the pairing button. It is usually labeled as "Pair" or represented by a Bluetooth symbol.
3. Press and hold the pairing button on the transmitter until the LED indicator starts flashing rapidly. This indicates that the transmitter is in pairing mode.
4. On the receiver, locate the pairing button. It is usually labeled as "Pair" or represented by a Bluetooth symbol.
5. Press and hold the pairing button on the receiver until the LED indicator starts flashing rapidly. This indicates that the receiver is in pairing mode.
6. Wait for the transmitter and receiver to establish a connection. This may take a few seconds.
7. Once the connection is established, the LED indicators on both the transmitter and receiver will stop flashing and remain solid.
8. Test the audio transmission by playing audio from your source device. The audio should now be wirelessly transmitted to the receiver.
Note: If the pairing process is not successful, try resetting both the transmitter and receiver by turning them off and on again. Repeat the pairing process from step 2.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the YMOO RT5066 wireless audio transmitter and receiver.
Add New Comment