Answer
Nov 06, 2024 - 09:12 PM
To connect the Peluso 22 251 microphone to your audio interface or mixer, follow these steps:
1. Locate the XLR output connector on the back of the microphone.
2. Take an XLR cable and connect one end to the XLR output connector of the microphone.
3. Connect the other end of the XLR cable to one of the XLR inputs on your audio interface or mixer.
4. Ensure that the connection is secure by tightening the connector screws on both ends of the XLR cable.
5. If you are using a mixer, make sure the corresponding input channel is selected for the microphone.
6. If your audio interface or mixer requires phantom power for the microphone, activate the phantom power switch or button. Refer to the user manual of your audio interface or mixer for specific instructions on activating phantom power.
7. Once the microphone is connected, you can adjust the input gain on your audio interface or mixer to set the desired sensitivity level for the microphone.
Please note that the specific steps may vary depending on your audio interface or mixer model. Refer to the user manual of your audio interface or mixer for detailed instructions on connecting microphones.
Add New Comment