User Manual Q&AAnswer
Nov 06, 2024 - 09:08 PM
To connect the Lauten Audio LS-208 Condenser Microphone to your recording interface, follow these steps:
1. Make sure the phantom power on your recording interface is turned off and the gain on the preamplifier channel is turned down.
2. Securely connect the female end of a high-quality standard 3-pin XLR microphone cable to the male connector on the LS-208 microphone.
3. Connect the male end of the XLR cable to your recording interface or microphone preamp.
4. After securely connecting the cables, turn on the +48v phantom power on your recording interface.
5. Allow the microphone to warm up for a couple of minutes.
6. Gradually increase the input gain on your recording interface or preamp to test and achieve your desired microphone input levels.
Please refer to the Lauten Audio LS-208 Condenser Microphone Operation Manual for more detailed instructions and illustrations.
Add New Comment