Answer
Nov 06, 2024 - 09:04 PM
To connect the Audix A231 Condenser Vocal Microphone to your audio equipment, you will need an XLR cable and an audio interface or mixer with XLR inputs. Here are the steps to connect the microphone:
1. Make sure your audio equipment is turned off and the phantom power is disabled.
2. Take the XLR cable and connect one end to the XLR output of the microphone (located at the bottom of the microphone body).
3. Connect the other end of the XLR cable to the XLR input of your audio interface or mixer.
4. Ensure that the connections are secure and tight.
5. Turn on your audio equipment and enable the phantom power (48V) if required.
6. Allow a minimum of 20 seconds for the microphone to stabilize after phantom power is supplied.
Please note that it is important to handle the microphone with care and avoid plugging or unplugging it from a PA system unless the channel is muted or phantom power to the microphone channel is turned off to prevent any potential damage or loud noises. For more detailed information, refer to the Audix A231 Condenser Vocal Microphone manual.
Add New Comment