Answer
Nov 06, 2024 - 08:47 PM
To pair your Bluetooth-enabled device with the Bezo Bluetooth Adapter, please follow these steps:
1. Power on the Bezo Bluetooth Adapter by pressing and holding the power button until the LED indicator flashes to indicate it is turned on.
2. Put the adapter into pairing mode by holding the power button for a few seconds until the LED indicator starts flashing rapidly. This indicates that the adapter is ready to be paired.
3. On your Bluetooth-enabled device (e.g., smartphone, tablet, or computer), navigate to the Bluetooth settings menu.
4. Enable Bluetooth on your device if it is not already turned on.
5. In the Bluetooth settings menu, search for available Bluetooth devices. The Bezo Bluetooth Adapter should appear as "BEZO" or a similar name.
6. Select the "BEZO" option to initiate the pairing process.
7. Once the pairing is successful, the LED indicator on the adapter will stop flashing rapidly and remain solid or blink slowly to indicate a successful connection.
8. You can now start streaming audio from your Bluetooth-enabled device to the non-Bluetooth audio system connected to the Bezo Bluetooth Adapter.
Note: If prompted, enter a PIN or passcode to complete the pairing process. The default PIN for most Bluetooth devices is "0000" or "1234," but please refer to the user manual for the specific PIN code of the Bezo Bluetooth Adapter.
If you encounter any issues during the pairing process, refer to the troubleshooting section in the user manual or contact the manufacturer's customer support for further assistance.
Add New Comment