Answer
Nov 06, 2024 - 08:45 PM
To connect the Slate VMS ML-1 Modeling Microphone to your audio interface, follow these steps:
1. Ensure that your audio interface has a microphone preamplifier and provides +48V phantom power. The ML-1 requires phantom power to operate.
2. Use an XLR cable to connect the ML-1 to your audio interface. Plug one end of the XLR cable into the microphone's XLR connector and the other end into the corresponding XLR input on your audio interface.
3. Make sure the XLR cable is securely connected to both the microphone and the audio interface to ensure a stable connection.
4. Enable the +48V phantom power on your audio interface. This is usually done through a switch or button labeled "phantom power" on the interface. Refer to your audio interface's user manual for specific instructions on enabling phantom power.
5. Once the microphone is connected and phantom power is enabled, you can start recording with the Slate VMS ML-1 Modeling Microphone using your preferred digital audio workstation (DAW) or recording software.
Please refer to the user manual and documentation provided with the Slate VMS ML-1 Modeling Microphone for more detailed instructions and information on connecting the microphone to your specific audio interface.
Add New Comment