Answer
Nov 06, 2024 - 08:42 PM
To connect the Neumann M149 Amplifier Tube Microphone to your audio interface, you will need an XLR cable and +48V phantom power. Here are the steps to connect the microphone:
1. Locate the XLR output on the power supply unit of the Neumann M149 microphone.
2. Connect one end of the XLR cable to the XLR output on the power supply unit.
3. Connect the other end of the XLR cable to one of the microphone inputs on your audio interface.
4. Make sure that the phantom power switch on your audio interface is turned on. The Neumann M149 requires +48V phantom power to operate.
5. Once the microphone is connected, turn on the power supply unit by plugging it into a power outlet.
6. Wait for a few minutes to allow the tube in the microphone to reach its stable operating condition.
7. You can now use the Neumann M149 microphone for recording or any other audio applications.
Please refer to the Neumann M149 Amplifier Tube Microphone Operating Instructions manual for more detailed information on the setup and usage of the microphone.
Add New Comment