Answer
Nov 06, 2024 - 08:36 PM
To switch between transmitter (TX) and receiver (RX) modes on the PNGKNYOCN USB Bluetooth Transmitter Receiver Adapter, follow these steps:
1. Ensure that the adapter is powered on and connected to the audio source or device you want to use.
2. Locate the mode button on the adapter. It is usually labeled as "TX/RX" or "Mode."
3. Press and hold the mode button for a few seconds until the mode indicator light starts flashing or changes color.
4. Release the mode button.
5. The adapter will now switch to the opposite mode. For example, if it was in transmitter mode, it will switch to receiver mode, and vice versa.
6. You can now pair the adapter with your Bluetooth headphones, speakers, or other devices in the corresponding mode.
For more detailed instructions and illustrations, please refer to the user manual provided with the PNGKNYOCN USB Bluetooth Transmitter Receiver Adapter.
Add New Comment