User Manual Q&AAnswer
Nov 06, 2024 - 08:24 PM
Installing the HP 64 X4D92AN Tri-color Ink Cartridges in your printer is a straightforward process. Here are the steps to follow:
1. Make sure your printer is turned on.
2. Open the printer cover or access panel to reveal the cartridge slots.
3. Wait for the cartridge carriage to move to the cartridge replacement position. If it doesn't move automatically, consult your printer's user manual for instructions on how to access the cartridge replacement position.
4. Remove the new HP 64 Tri-color Ink Cartridge from its packaging. Be careful not to touch the electrical contacts or ink nozzles.
5. Remove the protective tape from the cartridge.
6. Hold the cartridge by its sides, with the contacts facing towards the printer.
7. Insert the cartridge into the corresponding slot. The color-coded label on the cartridge should match the color-coded icon on the slot.
8. Gently push the cartridge into the slot until it clicks into place.
9. Repeat the process for any other cartridges that need to be replaced.
10. Close the printer cover or access panel.
11. Wait for the printer to recognize the new cartridges. This may take a few moments.
12. Once the printer indicates that the cartridges are installed and ready, you can start printing.
Please note that these instructions are general guidelines. For specific instructions on installing the HP 64 X4D92AN Tri-color Ink Cartridges in your particular printer model, refer to the user manual provided with your printer.
Add New Comment