User Manual Q&AAnswer
Nov 06, 2024 - 08:22 PM
Installation of the HP 962XL High-yield Ink Cartridge in your HP OfficeJet Pro printer is a straightforward process. Here are the step-by-step instructions:
1. Turn on your HP OfficeJet Pro printer.
2. Open the ink cartridge door. This is usually located on the front or top of the printer.
3. Remove the old cartridge by pressing down gently and pulling it out. Make sure to dispose of the old cartridge properly.
4. Unpack the HP 962XL cartridge and remove any protective tape or clips. Be careful not to touch the gold contacts or the ink nozzles.
5. Slide the new cartridge into the slot until it clicks into place. Ensure that it is securely inserted.
6. Close the cartridge door and wait for the printer to recognize the new cartridge. The printer may take a few moments to initialize and align the cartridge.
7. Once the printer recognizes the new cartridge, you are ready to start printing.
It is recommended to print a test page after installing the new cartridge to ensure that it is functioning correctly. This can be done through the printer's control panel or software.
Please refer to the "Product Usage Instructions" section of the manual for more details and illustrations on cartridge installation.
If you encounter any issues during the installation process, consult the printer's user manual or contact HP customer support for further assistance.
Add New Comment