Answer
Nov 06, 2024 - 07:56 PM
To connect the SE Electronics Z5600A II Tube Condenser Microphone to your audio interface or mixer, follow these steps:
1. Ensure that your audio interface or mixer can provide phantom power (+48V) as the Z5600A II typically requires phantom power for proper operation.
2. Connect the included 8-pin microphone cable from the floor box to the microphone.
3. Connect the XLR end of the microphone cable to the appropriate input on your audio interface or mixer.
4. Connect the IEC power cable to the power supply unit (floor box) and plug it into a power outlet.
5. Turn on the power via the switch on the back of the Z5600A II floor box.
It is important to note that the microphone should only be connected to the included Z5600A II power supply. Do not apply phantom voltage (+48VDC) from an external interface or preamplifier to ensure safe and reliable operation.
For more detailed information and illustrations, please refer to the SE Electronics Z5600A II Tube Condenser Microphone User Manual.
Add New Comment