User Manual Q&AAnswer
Nov 06, 2024 - 07:49 PM
To connect the WA-47 microphone to your audio interface, follow these steps:
1. Ensure that your audio interface provides +48V phantom power, as the WA-47 requires phantom power for proper operation.
2. Locate the 7-pin female microphone cable connector on the power supply of the WA-47.
3. Connect one end of the included 7-pin Gotham Audio cable to the 7-pin connector on the power supply.
4. Connect the other end of the 7-pin cable to the WA-47 microphone.
5. Locate the XLR output on the power supply.
6. Connect a standard 3-pin XLR microphone cable to the XLR output.
7. Connect the other end of the XLR cable to your audio interface's microphone input.
8. Ensure that your audio interface is set to receive input from the microphone input channel.
9. Turn on the WA-47 microphone by using the power switch on the power supply.
10. Adjust the input gain on your audio interface to achieve the desired recording level.
Please refer to the instruction manual for more detailed information on connecting and setting up the WA-47 microphone.
Add New Comment