Answer
Nov 06, 2024 - 07:46 PM
To set up the Oktava MK-101 Professional Microphone, please follow these steps:
1. Microphone Installation into Clip:
a. xxxx the microphone clip onto a robust, stable stand.
b. Draw the clip clamps apart and insert the microphone.
c. Use the xxxx on the clip to rotate the microphone if needed.
2. Microphone Installation into Shock Mount:
a. xxxx the microphone shock mount (AM-20) onto a robust, stable stand.
b. Insert the microphone on the side of the shock mount inner ring.
c. Use the nut and wing xxxx to rotate the microphone if needed.
3. Microphone Connection:
a. Connect the microphone only to microphone inputs or power supply units that provide 48V phantom power according to IEC 61938.
b. Connect the microphone to the XLR-3 socket of the mixing console, microphone amplifier, or power supply unit using an XLR-3 microphone cable.
Note: Ensure that the power supply is suitable for the microphone to avoid any damage.
Once the microphone is installed and connected, point it towards the sound source for optimal audio capture. To reduce external noise, ensure there are no sources of parasitic noise in the microphone's active zone. It is also recommended to use a pop screen when working with vocalists to extend the microphone's lifespan.
For more detailed information and illustrations, please refer to the Oktava MK-101 Professional Microphone Operation Manual.
Add New Comment