Answer
Nov 06, 2024 - 07:32 PM
To connect the FC-357 microphone to your recording interface, follow these steps:
1. Make sure the phantom power and gain on your recording interface are turned off before connecting the microphone.
2. Securely attach the microphone shock mount to a high-quality microphone stand and tighten the wing nut at the shock mount elbow.
3. Carefully thread the FC-357 into the shock mount. Rotating the microphone in the opposite direction of the bottom nut will assist with threading it into the shock mount.
4. Securely connect the female end of a high-quality standard 3-pin XLR microphone cable to the bottom of the FC-357 microphone and the male end to your recording interface or microphone preamp.
5. Choose your desired pad and polar pattern selections on each side of the FC-357 microphone.
6. Turn on the +48 volt phantom power on the recording interface channel you have connected the microphone to and allow the microphone to warm up for several minutes.
7. Gradually increase the input gain on your recording interface or preamp to test and achieve your desired microphone input levels.
Please refer to the operating manual for more detailed instructions and illustrations.
Add New Comment