User Manual Q&AAnswer
Nov 06, 2024 - 04:03 AM
To switch between different modes on the 1Mii B0303 Wireless Bluetooth Transmitter Receiver, follow these steps:
1. TX Mode (Transmitter Mode):
- Connect the 1Mii B0303 to a non-Bluetooth audio source using the included audio cables.
- Press the power button on the 1Mii B0303 to turn it on.
- The device will automatically enter TX Mode, and the LED indicator will show a solid blue light.
- Pair your Bluetooth headphones or speakers with the 1Mii B0303 to start streaming audio wirelessly.
2. RX Mode (Receiver Mode):
- Connect the 1Mii B0303 to a non-Bluetooth speaker or audio system using the included audio cables.
- Press the power button on the 1Mii B0303 to turn it on.
- Press and hold the mode button for 3 seconds until the LED indicator flashes blue and red alternately.
- The device will enter RX Mode, and the LED indicator will show a solid red light.
- Pair your Bluetooth-enabled device (such as a smartphone or tablet) with the 1Mii B0303 to stream audio to the connected speaker or audio system.
3. Bypass Mode (Non-Bluetooth):
- Connect the audio source directly to the audio output of the 1Mii B0303 using the included audio cables.
- Press the power button on the 1Mii B0303 to turn it on.
- Press and hold the mode button for 6 seconds until the LED indicator flashes blue and red alternately.
- The device will enter Bypass Mode, and the LED indicator will show a solid purple light.
- The audio will pass through the 1Mii B0303 without any Bluetooth transmission.
Please refer to the 1Mii B0303 Wireless Bluetooth Transmitter Receiver User Manual for more detailed instructions and illustrations.
Add New Comment