User Manual Q&AAnswer
Nov 06, 2024 - 03:33 AM
Installing the HP 65XL N9K04AN High-yield Ink Cartridge in your printer is a straightforward process. Here are the steps to follow:
1. Make sure your printer is turned on.
2. Open the printer cover or access panel to reveal the ink cartridge carriage.
3. Wait for the ink cartridge carriage to move to the center of the printer.
4. Remove the old or empty ink cartridge by gently pushing down on it and pulling it out towards you.
5. Take the new HP 65XL N9K04AN High-yield Ink Cartridge out of its packaging.
6. Remove the protective tape or plastic film from the cartridge.
7. Hold the cartridge by its sides, with the contacts facing towards the printer.
8. Slide the cartridge into the empty slot, aligning it with the corresponding color-coded slot.
9. Push the cartridge firmly until it clicks into place.
10. Close the printer cover or access panel.
Your printer may prompt you to align the ink cartridges after installation. If so, follow the on-screen instructions to complete the alignment process.
It's important to note that these steps are general guidelines, and the specific installation process may vary depending on your printer model. For detailed instructions tailored to your printer, please refer to the user manual or documentation provided by HP.
Add New Comment