Answer
Nov 06, 2024 - 03:14 AM
To connect the XNVDOJT T2 Condenser Microphone to your computer, you will need an audio interface or mixer that supports XLR input. Here are the steps to connect the microphone:
1. Ensure that your computer is powered on and the audio interface or mixer is connected and powered on as well.
2. Locate the XLR cable included with the microphone package.
3. Connect one end of the XLR cable to the XLR output on the microphone.
4. Connect the other end of the XLR cable to the XLR input on your audio interface or mixer.
5. Make sure the audio interface or mixer is connected to your computer via USB or another appropriate connection.
6. Turn on phantom power on your audio interface or mixer. The XNVDOJT T2 requires 48V phantom power for proper operation.
7. Set the gain level on your audio interface or mixer. Start with a low gain level and gradually increase it until you achieve the desired recording volume without distortion.
8. Open your recording software on your computer and select the XNVDOJT T2 as the input device.
9. Test the microphone by speaking or singing into it and monitoring the audio levels on your recording software.
Please refer to the user guide that came with your XNVDOJT T2 Condenser Microphone for more detailed instructions and troubleshooting tips.
Add New Comment