User Manual Q&AAnswer
Nov 06, 2024 - 03:02 AM
Installing the GITRE ANTENNA167 Digital Antenna is a straightforward process. Here are the step-by-step instructions:
1. Elevate and position the antenna on a window or wall. For optimal reception, place it as high as possible.
2. Attach the provided coaxial cable to the TV. Connect one end of the cable to the antenna's coaxial port and the other end to the TV's antenna input.
3. If your home is within 35 miles of the broadcasting tower, switch the amplifier to "short range" for optimal reception. Adjust the amplifier setting based on your proximity to the towers.
4. Power the antenna by plugging the USB cable into a USB port on your TV or a USB power adapter.
5. Initiate a channel scan on your TV. This will allow your TV to detect and store the available channels.
6. Wait for the scanning process to complete, and then you can access the available channels.
7. If needed, fine-tune the antenna positioning for the best reception. You may need to experiment with different locations or orientations to optimize signal strength.
8. For outdoor installations, ensure stable mounting to withstand wind and adverse weather conditions.
9. To switch between 4K and 8K channels, use the settings on your TV.
10. For more specific features and settings, refer to the user manual provided with the antenna.
Please note that it's important to thoroughly read the provided manual before installing the antenna. Additionally, if you move the antenna, always remember to re-scan for channels to ensure you have the most up-to-date channel listings.
Add New Comment