User Manual Q&AAnswer
Nov 06, 2024 - 02:22 AM
To install the Tuliyet C13-Q3yPttL Dash Cam front and rear cameras, follow these steps:
1. Front Camera Installation:
- Connect the power cord to the front camera and plug it into the intersection of the ceiling and glass.
- Run the power cord down the A-pillar seam.
- Pull the power cord along the door seam to the bottom of the storage compartment.
- Run the power cord along the bottom of the storage box towards the cigarette lighter and insert the cigarette lighter plug into the cigarette lighter hole.
2. Rear Camera Installation:
- Connect the black wire of the rear camera to the front camera through the HDMI interface.
- Choose one of the following installation positions:
a) Above the inner side of the rear windshield: Install the rear camera above the inner side of the rear windshield. This method only allows for recording rear-view video and does not support the reversing vision function.
b) The upper edge of the license plate frame: Install the rear camera on the upper edge of the license plate frame with the xxxx pad facing up. Connect the red wire of the rear camera to the live wire of the reversing light. This method supports the reversing vision function but may require professional installation.
3. Start the engine and perform a test run to ensure the cameras are functioning properly.
Please refer to the manual for more detailed instructions and illustrations on the installation process.
Add New Comment