User Manual Q&AAnswer
Nov 06, 2024 - 02:10 AM
To change the batteries in your handheld electronic calculator, please follow these steps:
1. Turn off the calculator and make sure it is not connected to any power source.
2. Locate the battery compartment on the back or bottom of the calculator. It is usually secured with a small xxxx or latch.
3. Use a screwdriver or your fingers to remove the xxxx or open the latch, allowing access to the battery compartment.
4. Take note of the battery orientation. Inside the compartment, there will be markings indicating the correct polarity (+ and -) for the batteries.
5. Remove the old batteries from the compartment, paying attention to their orientation.
6. Insert the new batteries into the compartment, aligning them according to the polarity markings.
7. Close the battery compartment by securing the xxxx or closing the latch.
8. Turn on the calculator to check if the new batteries are working properly.
Please refer to the user manual for specific instructions and illustrations related to your calculator model. It is important to use the correct type and size of batteries recommended by the manufacturer to ensure optimal performance.
Add New Comment