User Manual Q&AAnswer
Nov 06, 2024 - 02:07 AM
To connect the Avantone CK7 Plus microphone to your audio interface, follow these steps:
1. Make sure your audio interface has a +48V phantom power option, as the CK7 Plus requires phantom power to operate.
2. Locate the XLR output connector on the CK7 Plus microphone. It is a male XLR 3-pin connector.
3. Connect the XLR output connector of the CK7 Plus microphone to the XLR input on your audio interface using a balanced XLR cable.
4. Ensure that the phantom power option on your audio interface is turned on. This will provide the necessary power to the CK7 Plus microphone.
5. Set the input gain level on your audio interface to an appropriate level for recording. Refer to the user manual of your audio interface for specific instructions on adjusting the input gain.
6. You are now ready to use the Avantone CK7 Plus microphone with your audio interface for recording.
Note: Always follow the instructions provided by your audio interface manufacturer for proper setup and usage.
Add New Comment