Answer
Nov 06, 2024 - 02:04 AM
To connect the 797 Audio CR86 Condenser Microphone to your computer, you will need an audio interface or mixer that supports XLR connectivity. Here are the step-by-step instructions:
1. Ensure that your audio interface or mixer is powered on and connected to your computer via USB or another appropriate connection.
2. Locate the XLR output on the back of the microphone. It is a three-pin connector.
3. Take the provided XLR cable and connect one end to the XLR output of the microphone.
4. Connect the other end of the XLR cable to the XLR input on your audio interface or mixer. The XLR input is also a three-pin connector.
5. Once the microphone is connected, make sure the audio interface or mixer is selected as the input device in your computer's audio settings. This will vary depending on your operating system.
6. Open your preferred recording software on your computer and select the audio interface or mixer as the input source.
7. Set the gain levels on your audio interface or mixer to achieve the desired audio level without clipping. Adjusting the gain controls will vary depending on your specific audio interface or mixer.
8. You are now ready to start recording with the 797 Audio CR86 Condenser Microphone on your computer.
Please refer to the user manual for your specific audio interface or mixer for more detailed instructions on connecting and setting up the microphone.
Add New Comment