Answer
Nov 06, 2024 - 01:27 AM
To connect the Neumann KMS 104 Plus microphone to your audio interface or mixer, you will need a microphone cable with an XLR connector. The Neumann KMS 104 Plus has a 3-pin XLR connector, so make sure your cable has the appropriate connectors.
Here is the correct wiring for the microphone:
- Pin 1: 0 V/ground
- Pin 2: Modulation (+phase)
- Pin 3: Modulation (-phase)
Connect Pin 1 of the microphone to the ground or shield connection on your audio interface or mixer. Connect Pin 2 and Pin 3 to the appropriate audio input channels on your device.
Ensure that your audio interface or mixer is capable of providing +48V phantom power, as the Neumann KMS 104 Plus requires phantom power for operation. Phantom power is typically enabled through a switch or setting on your device.
Once the microphone is properly connected, you can adjust the input gain on your audio interface or mixer to achieve the desired recording level.
Please refer to the Neumann KMS 104 Plus operating instructions for more detailed information on the microphone's specifications and usage.
Add New Comment