User Manual Q&AAnswer
Nov 06, 2024 - 12:58 AM
To connect the CAD Audio E50 Condenser Microphone to your audio interface or mixer, follow these steps:
1. Plug the XLR cable into the microphone's XLR output.
2. Connect the other end of the XLR cable to an XLR input on your audio interface or mixer.
3. Ensure that the XLR connection is secure and properly seated.
4. If your microphone requires phantom power, make sure to activate it on your audio interface or mixer. Phantom power is typically used for condenser microphones to provide the necessary power for operation.
5. Once connected, you can adjust the microphone's gain and sensitivity settings on your audio interface or mixer to achieve the desired recording level.
Please refer to the user manual for your specific audio interface or mixer for detailed instructions on connecting and setting up the CAD Audio E50 Condenser Microphone.
Add New Comment