User Manual Q&AAnswer
Nov 06, 2024 - 12:18 AM
To install the battery pack in the Ryobi P737 Portable Cordless Power Inflator, follow these steps:
1. Make sure the inflator is turned off and disconnected from any power source.
2. Locate the battery port on the inflator, which is usually located on the back or bottom of the tool.
3. Align the raised rib on the battery pack with the groove in the battery port.
4. Insert the battery pack into the tool, ensuring that the latches on each side of the battery pack snap into place and secure the battery pack in the tool.
5. Once the battery pack is securely installed, you can proceed to use the inflator.
Note: It is important to use a compatible battery pack listed in the tool/appliance/battery pack/charger correlation supplement 987000-432. For complete charging instructions, refer to the operator's manual for your specific battery pack and charger.
Please refer to the Ryobi P737 Portable Cordless Power Inflator Operator's Manual for more detailed instructions and safety information.
Add New Comment