Answer
Nov 05, 2024 - 11:56 PM
Replacing the ink ribbon on the Sharp EL-1197PIII Electronic Printing Calculator is a straightforward process. Here are the step-by-step instructions:
1. Make sure the calculator is turned off and unplugged from the power source.
2. Open the printer cover located at the top of the calculator by lifting it upward.
3. Locate the ink ribbon cartridge inside the printer compartment. It is usually black in color.
4. Grasp the ribbon cartridge firmly and pull it straight up to remove it from the calculator.
5. Take the new ink ribbon cartridge (Victor ink ribbon 7010) and remove any protective packaging.
6. Insert the new ink ribbon cartridge into the printer compartment, aligning it with the guides on the sides. Make sure it is securely seated.
7. Close the printer cover by pushing it down until it clicks into place.
8. Plug the calculator back into the power source and turn it on.
Your calculator is now ready to use with the new ink ribbon. For more detailed instructions and illustrations, please refer to the "Replacing the Ink Ribbon" section in the Sharp EL-1197PIII Electronic Printing Calculator Operation Manual.
Add New Comment