User Manual Q&AAnswer
Nov 05, 2024 - 11:54 PM
To replace the ink roller in the CATIGA CP-90A Printing Calculator, please follow these steps:
1. Remove the transparent cover carefully by pressing down on the arrow symbol and pushing outward. This will allow you to access the ink roller.
2. Lift out the metal arm that holds the ink roller in place.
3. Use your finger to lift up and remove the old ink roller where it says "Pull Up".
4. Install a new ink roller by pressing it down firmly until you hear a click.
5. Reinsert the metal arm to secure the new ink roller in place.
6. Finally, reattach the plastic cover by pushing it back into position.
Please note that the CATIGA CP-90A Printing Calculator uses an IR-40T industry standard ink roller, which can be easily found in stores or online.
For more detailed instructions and illustrations, please refer to the CATIGA CP-90A Printing Calculator User Manual.
Add New Comment