User Manual Q&AAnswer
Nov 05, 2024 - 11:37 PM
To inflate a tire using the VIAIR 400P Portable Compressor, follow these steps:
1. Attach a quick connect coupler to the air compressor.
2. Push the tire chuck, with the lever in the upright position, down over the tire valve stem.
3. Push the lever down to the horizontal position to lock it in place.
4. Check to make sure the Deflator Collar Lock is disengaged.
5. Turn on the compressor switch to begin inflation.
6. Monitor the pressure gauge and stop the inflation process when the desired pressure is reached.
7. Turn off the compressor switch.
8. Disconnect the tire chuck from the tire valve stem.
It's important to note that you should never exceed the recommended pressure on articles to be inflated to avoid overinflation, which can cause serious injury. Always refer to the manufacturer's recommended tire pressures for your specific vehicle.
For more detailed instructions and safety precautions, please refer to the VIAIR 400P Portable Compressor User Manual.
Add New Comment