User Manual Q&AAnswer
Nov 05, 2024 - 11:10 PM
To connect audio-enabled cameras or microphones to the Swann DVR-5680 DVR for audio recording, follow these steps:
1. Ensure that your audio-enabled cameras or microphones are compatible with the DVR-5680. Check the specifications of the cameras or microphones to confirm compatibility.
2. Locate the audio input ports on the back of the DVR-5680. These ports are typically labeled as "Audio In" or have a microphone icon next to them.
3. Connect the audio output of your cameras or microphones to the audio input ports on the DVR-5680. Use the appropriate cables, such as RCA or 3.5mm audio cables, depending on the audio output of your devices and the input ports on the DVR.
4. Make sure to connect each camera or microphone to the corresponding audio input port on the DVR. For example, if you have four cameras with audio, connect each camera's audio output to the respective audio input port on the DVR.
5. Once the connections are made, power on the DVR and cameras or microphones.
6. Access the DVR's menu using the included USB mouse or remote control. Refer to the instruction manual for detailed instructions on navigating the menu.
7. Within the DVR's menu, locate the audio settings or configuration options. These settings may be found under the "Settings" or "System" menu.
8. Enable audio recording for the desired channels or cameras. You may need to select the specific audio input source for each channel or camera.
9. Save the settings and exit the menu.
10. The DVR-5680 is now ready to record audio along with video from your connected cameras or microphones. You can adjust the audio recording settings and volume levels as needed through the DVR's menu.
For more detailed instructions and illustrations, please refer to the instruction manual provided with the Swann DVR-5680 DVR.
Add New Comment