User Manual Q&AAnswer
Nov 05, 2024 - 11:03 PM
To adjust the depth of the fastener, follow these steps:
1. Turn off the unit and remove the air supply before making any adjustments.
2. Locate the depth adjustment wheel on the tool.
3. To drive the fastener shallower, rotate the depth adjustment wheel to the right.
4. To drive the fastener deeper, rotate the depth adjustment wheel to the left.
5. Make sure to test the adjusted depth on a scrap piece of material before using the tool on your intended workpiece.
Please refer to the instruction manual for more detailed information and illustrations on adjusting the depth of the fastener.
Add New Comment