Answer
Nov 05, 2024 - 10:52 PM
To charge the battery of the Mellif DWMLDB Cordless Air Pump, please follow these steps:
1. Connect the charging cable: Plug one end of the provided charging cable into the charging port of the air pump. The charging port is usually located on the side or back of the pump.
2. Connect the other end of the charging cable: Plug the other end of the charging cable into a power source, such as a wall outlet or a USB port on a computer.
3. Charging indicator: Once the charging cable is connected, a charging indicator light on the air pump will illuminate. This light indicates that the battery is being charged.
4. Charging time: Allow the battery to charge fully. The charging time may vary, but it typically takes around 3 to 5 hours to fully charge the battery. Refer to the user manual for specific charging time recommendations.
5. Charging complete: When the battery is fully charged, the charging indicator light will turn off or change color to indicate that the charging process is complete.
6. Disconnect the charging cable: Once the battery is fully charged, disconnect the charging cable from both the air pump and the power source.
It is important to note that the Mellif DWMLDB Cordless Air Pump usually comes with a lithium-ion rechargeable battery. Make sure to follow the charging instructions provided in the user manual to ensure proper and safe charging of the battery.
Add New Comment