Answer
Nov 05, 2024 - 09:42 PM
To connect your laptop to the Sanyo PLC-XW50 Multimedia Projector, you will need a VGA cable. Here are the steps to set it up:
1. Make sure both your laptop and the projector are turned off.
2. Locate the VGA port on your laptop and the VGA input on the projector.
3. Connect one end of the VGA cable to the VGA port on your laptop and the other end to the VGA input on the projector.
4. Turn on your laptop and the projector.
5. On your laptop, go to the display settings and select the option to extend or duplicate the display.
6. Adjust the projector's keystone correction if needed to align the projected image properly.
7. Play your presentation on your laptop, and it should be displayed on the projector.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Sanyo PLC-XW50 Multimedia Projector. You can find the user manual in the "User Manual (CD)" included in the box or access it online using the provided link.
Add New Comment