Answer
Nov 05, 2024 - 08:43 PM
To connect your laptop to the Artograph LED200 Digital Projector, you will need an HDMI cable or a VGA cable (depending on the available ports on your laptop). Here are the steps to set it up:
1. Check the available ports on your laptop: Look for an HDMI port or a VGA port on your laptop. If your laptop has an HDMI port, use an HDMI cable. If it has a VGA port, use a VGA cable.
2. Connect the cable to the projector: Locate the corresponding port on the back of the Artograph LED200 Digital Projector. If you are using an HDMI cable, connect one end to the HDMI port on the projector. If you are using a VGA cable, connect one end to the VGA port on the projector.
3. Connect the cable to your laptop: Connect the other end of the cable to the HDMI or VGA port on your laptop.
4. Set the input source on the projector: Turn on the projector and press the "Input" or "Source" button on the remote control or the projector itself. Use the arrow keys to select the appropriate input source (HDMI or VGA) and press the "Enter" or "OK" button.
5. Adjust the display settings on your laptop: On your laptop, go to the display settings and select the appropriate display mode (e.g., "Duplicate" or "Extend") to ensure that the projector is recognized as an external display.
6. Start your presentation: Open your presentation on your laptop and start the slideshow. The content should now be displayed on the Artograph LED200 Digital Projector.
For more detailed instructions and troubleshooting tips, please refer to the Operation Guide provided with the Artograph LED200 Digital Projector.
Add New Comment