User Manual Q&AAnswer
Nov 05, 2024 - 02:59 AM
To enter measurements in feet, inches, and fractions on the Calculated Industries 8526 Project Calc Plus Mx Calculator, follow these steps:
1. Press the "Feet-Inch-Fraction" key located on the calculator's keypad. This will activate the feet-inch-fraction mode.
2. Enter the feet value by pressing the corresponding number keys on the keypad. For example, if you want to enter 5 feet, press "5".
3. Press the "Inch" key to switch to the inch input mode.
4. Enter the inches value by pressing the corresponding number keys on the keypad. For example, if you want to enter 6 inches, press "6".
5. Press the "Fraction" key to switch to the fraction input mode.
6. Enter the fraction value by using the fraction keys on the keypad. For example, if you want to enter 3/8 of an inch, press "3", then press the "/" key, and finally press "8".
7. Once you have entered the desired measurement in feet, inches, and fractions, you can proceed with performing calculations or estimating quantities and costs using the calculator's other functions.
For more detailed instructions and information on using the Calculated Industries 8526 Project Calc Plus Mx Calculator, please refer to the user's guide provided with the product. You can access the user's guide by clicking on the link below:
[Calculated Industries 8526 Project Calc Plus Mx Calculator User's Guide](https://manuals.plus/wp-content/uploa...)
Add New Comment