User Manual Q&AAnswer
Nov 05, 2024 - 01:33 AM
Connecting the SPT SD-9263SS Portable Stainless Steel Dishwasher to a kitchen faucet is a straightforward process. Here are the steps to follow:
1. Ensure that the dishwasher is placed near a standard kitchen faucet with easy access to the water supply.
2. Locate the inlet hose included in the box. This hose is typically labeled and has a female connector on one end.
3. Remove the aerator from your kitchen faucet. The aerator is the small screen-like attachment at the end of the faucet.
4. Attach the included faucet adapter to your kitchen faucet. The faucet adapter should have a male connector that matches the female connector on the inlet hose.
5. xxxx the inlet hose onto the faucet adapter until it is securely attached.
6. Make sure the hose is not kinked or twisted, as this may restrict water flow.
7. Connect the other end of the inlet hose to the dishwasher's water inlet located at the back of the unit. The water inlet is typically labeled and has a male connector.
8. Ensure that the hose is securely attached to the water inlet, but avoid overtightening.
9. Once the connections are secure, turn on the kitchen faucet to allow water to flow into the dishwasher.
10. Check for any leaks around the connections. If you notice any leaks, tighten the connections or make sure the hoses are properly seated.
11. Once the dishwasher is connected to the faucet and water is flowing, you can proceed with selecting your desired wash cycle and starting the dishwasher.
For more detailed instructions and illustrations, please refer to the "Installation" section of the SPT SD-9263SS Portable Stainless Steel Dishwasher Instruction Manual.
Add New Comment