Answer
Nov 05, 2024 - 01:09 AM
To connect the ScanSnap iX1300 Duplex Scanner to your computer, follow these steps:
1. Unpack the scanner and ensure that all components, including the power cable and USB cable, are present.
2. Select a suitable location for the scanner near your computer, ensuring sufficient space for the paper output tray and easy access to the control panel.
3. Connect the power cable to the scanner's power port.
4. Plug the other end of the power cable into a power outlet.
5. Attach one end of the USB cable to the scanner's USB port.
6. Connect the remaining end of the USB cable to an available USB port on your computer.
7. Activate the scanner by pressing its power button. The scanner should power up, with indicator lights illuminating to signal its readiness.
For more detailed instructions and illustrations, please refer to the "Hardware Setup" section in the ScanSnap iX1300 Duplex Scanner User Manual.
Add New Comment