User Manual Q&AAnswer
Nov 04, 2024 - 11:41 PM
To connect the Epson ES-300WR scanner to your computer, please follow these steps:
1. Ensure that your computer is powered on and running.
2. Locate the USB cable that came with the scanner.
3. Connect one end of the USB cable to the USB port on the back of the scanner.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the connection is established, the scanner should be recognized by your computer.
6. Install any necessary drivers or software that may be required for the scanner to function properly. You can refer to the User's Guide provided with the scanner for detailed instructions on driver installation.
7. Once the drivers and software are installed, you should be able to use the scanner with your computer.
Please note that the specific steps may vary depending on your computer's operating system. For detailed instructions and troubleshooting tips, please refer to the User's Guide provided with the scanner.
Add New Comment