User Manual Q&AAnswer
Nov 04, 2024 - 11:39 PM
To install an SSD into the ACASIS MAC3W USB C 3.2 SSD Enclosure, please follow these steps:
1. Remove the cap and take the PCB board out.
2. For an original Apple Mac SSD, insert it into the PCB card slot and fix it with a xxxx .
3. For a general NVMe SSD, insert the SSD adapter into the PCB card slot first, then insert the SSD.
4. Attach the thermal pad on the top of the SSD.
5. Put the heat sink over the thermal pad.
6. Slide the PCB into the enclosure until it lines up with the slot edge. The logo side of the enclosure should be upward.
7. Install the cap with screws, then the installation is complete.
Please refer to the user manual for visual illustrations and further instructions on the installation process.
Add New Comment