Answer
Nov 04, 2024 - 11:38 PM
To connect the KODAK RODFD20 Mini Digital Film Scanner to your computer, please follow these steps:
1. Make sure your computer is powered on and running.
2. Locate the USB cable that came with the scanner.
3. Connect one end of the USB cable to the USB port on the scanner.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the scanner is connected, your computer should recognize it as a new device.
6. If prompted, install any necessary drivers or software for the scanner. You can refer to the user manual for instructions on installing the software.
7. Once the drivers and software are installed, you should be able to access and control the scanner through the provided software on your computer.
Please note that the specific steps may vary depending on your operating system and software version. For more detailed instructions, please refer to the user manual provided with the scanner.
Add New Comment