User Manual Q&AAnswer
Nov 04, 2024 - 10:43 PM
To switch between counting, batching, and adding modes on the Cassida 5520 UV MG Digital Money Counter, follow these steps:
1. Power on the machine and ensure that the hopper is empty.
2. The default mode when the machine is turned on is counting mode.
3. To switch to counting mode from another mode, press the "ADD/BAT" button until both the "add" and "batch" indicators are off.
4. To count bills, place them in the hopper following the proper loading procedure described in the manual.
5. The machine will start counting automatically and move the bills from the hopper to the stacker as it counts them. It will stop counting when the hopper is completely emptied and emit a confirmation beep. The counted number of bills will be displayed.
6. To switch to batching mode, press the "ADD/BAT" button until the "BATCH" indicator is on. If you want to change the batch amount, use the numeric keypad to enter the desired quantity.
7. The unit will start counting automatically once bills are placed in the hopper. When it counts the desired batch number, it will stop and emit a confirmation beep. The screen will show the number of bills in the counted batch. When the stacker is emptied, the unit will automatically start counting to the preset batch number again.
8. To change the batch quantity, wait until the unit completes the current batch. Enter the new batch quantity using the numeric keypad. Empty the stacker before placing new bills in the hopper.
9. To switch to adding mode, press the "ADD/BAT" button until the "ADD" indicator is on. In this mode, you can count multiple stacks of bills while keeping track of the total amount of bills counted.
10. To switch between modes while also batching, press the "ADD/BAT" button until both the "ADD" and "BATCH" indicators are on. Use the keypad to enter the desired batch amount. The unit will add the bills while also tracking the total count.
11. The Cassida 5520 UV MG Digital Money Counter also has a value counting mode. To activate this mode, press the "VAL" button. The value indicator will be lit. Depending on the model, you can enter the desired denomination value using the numeric keypad or select the desired denomination as a multiplier.
12. To switch between modes, simply press the corresponding buttons on the control panel.
Note: For more detailed instructions and information, refer to the user manual provided with the Cassida 5520 UV MG Digital Money Counter.
Add New Comment