User Manual Q&AAnswer
Nov 04, 2024 - 10:40 PM
To install the BizCardReader BCR901 Scanner, please follow the steps outlined in the installation guide provided above. Here is a summary of the installation process:
1. Insert the Application Software CD into the CD/DVD drive of your computer.
2. Follow the on-screen instructions to install the software applications. If the installation does not start automatically, locate the file "SETUP.EXE" in the Application CD using Windows Explorer and double-click on it to start the installation process.
3. Enter the 15-character Serial Number found on the CD envelope or CD case when prompted.
4. Leave the Application CD in the CD/DVD drive and proceed to install the scanner driver.
5. Plug one end of the USB cable provided into the scanner and the other end into your computer's USB port. The green light on the scanner should turn on.
6. The system will detect the new scanner and attempt to install the driver automatically. If prompted, select "Search for the best driver (recommended)" and allow the system to search online for the latest available drivers.
7. If prompted to specify a location for the scanner driver, select the Application CD in the CD/DVD drive.
8. If the driver installation fails, refer to the Troubleshooting section in the installation guide for further instructions.
9. Once the driver installation is complete, the scanner should be ready for use.
Please note that these are general instructions, and it is important to refer to the specific installation guide provided with your scanner for any additional or updated information.
For further troubleshooting or technical support, you can visit the BizCardReader website or contact their customer support.
Add New Comment