Answer
Nov 04, 2024 - 10:27 PM
To install the software and drivers for the Ambir ImageScan Pro 820ix scanner, please follow these steps:
1. Visit the Ambir support website at www.ambir.com/support/imagescan-pro-8...
2. Download the scanner software and drivers from the website. Make sure to download the correct drivers for your scanner model.
3. Once the download is complete, install the downloaded software and drivers on your computer. It is important to install the software and drivers before connecting the scanner.
4. Open the scanner door and attach the stacker tray by snapping the tray guide pins into the holes in the bottom of the ADF.
5. Before connecting the scanner to AC power, ensure that the scanner power switch is in the OFF position.
6. Plug the AC adapter into the scanner's power receptor and plug the other end into a standard AC power outlet.
7. Connect the scanner to your computer by plugging the square end of the included USB cable into the USB port at the rear of the scanner, and the rectangular end into an available USB port on your computer.
8. Switch the scanner ON using the scanner power switch. Wait until the number on the LED display changes from 0 to 1.
9. Once the number 1 is displayed, you are ready to start scanning.
By following these steps, you should be able to successfully install the software and drivers for your Ambir ImageScan Pro 820ix scanner and start scanning documents.
Add New Comment