User Manual Q&AAnswer
Nov 04, 2024 - 08:52 PM
To reset the surge protection on the BEVA QP460-CU Flat Plug Power Strip, follow these steps:
1. Turn off the power strip by flipping the on/off switch, if it has one.
2. Unplug the power strip from the wall outlet.
3. Wait for approximately one minute.
4. Plug the power strip back into the wall outlet.
5. Turn on the power strip by flipping the on/off switch, if applicable.
6. Check if the surge protection indicator is now illuminated.
If the surge protection indicator still does not light up after following these steps, it may indicate a problem with the surge protection feature. In such cases, it is recommended to contact customer support or consider replacing the power strip, as it may have reached its surge protection limit.
Add New Comment