Answer
Nov 04, 2024 - 08:45 PM
To connect the Fujitsu SP-1130Ne Duplex Document Scanner to your computer, follow these steps:
1. Ensure that your computer is powered on and running.
2. Locate the USB cable included in the box with the scanner.
3. Connect one end of the USB cable to the USB port on the back of the scanner.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Wait for your computer to recognize the scanner. It may take a few moments for the necessary drivers to install.
6. Once the scanner is recognized, you can begin using it with your scanning software.
For more detailed instructions and troubleshooting tips, please refer to the Operator's Guide provided with the scanner. You can access the guide by clicking on the "Operator's Guide" link above. The guide contains comprehensive information on setting up and using the Fujitsu SP-1130Ne scanner.
Add New Comment