Answer
Nov 04, 2024 - 08:30 PM
To connect the Brother DS-740D Document Scanner to your computer, please follow these steps:
1. Make sure your computer is turned on and the scanner is powered on.
2. Locate the USB cable that came with the scanner. It should be included in the box.
3. Connect one end of the USB cable to the USB port on the scanner. The USB port is located on the back or side of the scanner.
4. Connect the other end of the USB cable to an available USB port on your computer. Make sure to use a USB port that is compatible with the scanner.
5. Once the USB cable is securely connected, your computer should detect the scanner automatically. If prompted, install any necessary drivers or software for the scanner. You can refer to the User's Guide for instructions on installing the software.
6. After the scanner is successfully connected and recognized by your computer, you can start using it to scan your documents.
Please note that the above steps are general guidelines, and the specific instructions may vary depending on your computer's operating system and configuration. For detailed instructions and troubleshooting, please refer to the User's Guide provided with the scanner.
Add New Comment