User Manual Q&AAnswer
Nov 04, 2024 - 08:06 PM
Step 1: Disconnect
To begin the installation process, use the included jumper cable to connect both terminals on your current doorbell's chime after shutting off the electricity at the breaker. Keep in mind that the doorbell won't activate your existing chime.
Step 2: Connect
Next, connect the outside and unplug your current doorbell button. Attach the video doorbell wire to the back of the doorbell wiring.
Step 3: Set Up
Attach the faceplate, secure the doorbell to your house, and switch on the power at the breaker. To finish setting up, use the Ring App.
For more detailed instructions and illustrations, please refer to the user manual and quick start guide included in the box.
Note: It is recommended to consult a professional electrician if you are unsure about any electrical connections.
Please ensure that you have the necessary setup requirements, such as a standard doorbell system or a Ring plug-in adapter or transformer with the specified power supply.
If you encounter any issues during the installation process, you can contact Ring's customer support for assistance. They will be able to provide further guidance and troubleshooting steps.
Remember to always prioritize safety when working with electrical connections.
Add New Comment