User Manual Q&AAnswer
Nov 04, 2024 - 08:04 PM
To reset the Morecam J9 Wireless Doorbell Camera, follow these steps:
1. Locate the reset button: The reset button is usually located on the back or bottom of the camera. It is a small, recessed button that may require a pin or paperclip to press.
2. Press and hold the reset button: Using a pin or paperclip, press and hold the reset button for about 10 seconds. You may need to use some force to press the button.
3. Release the reset button: After holding the reset button for 10 seconds, release it.
4. Wait for the camera to reset: The camera will take a few moments to reset. During this time, the LED lights on the camera may flash or change colors.
5. Reconfigure the camera: Once the camera has reset, you will need to reconfigure it using the Morecam app. Follow the installation steps outlined in the user manual to set up the camera again.
Note: Resetting the camera will erase all previous settings and configurations. Make sure to have the necessary information, such as your Wi-Fi network details, ready for the reconfiguration process.
For more detailed instructions on resetting the Morecam J9 Wireless Doorbell Camera, refer to the user manual provided with the product.
Add New Comment