User Manual Q&AAnswer
Nov 04, 2024 - 07:40 PM
To change the chime sound on the SadoTech ST-FX-C Chimes Wireless Doorbells, follow these steps:
1. Plug in the smart doorbell receiver inside your home.
2. Install the outdoor remote doorbell transmitter in your preferred location.
3. Ensure both components are securely fastened using the provided double-sided tape, anchors, or screws.
4. Locate the button on the outdoor remote doorbell transmitter.
5. Press and hold the button on the outdoor transmitter for a few seconds until you hear a chime sound from the indoor receiver.
6. Release the button on the outdoor transmitter.
7. The chime sound on the indoor receiver will change to the next available option in the pre-set selection.
8. Repeat steps 5-7 until you find the desired chime sound.
9. Once you have selected the desired chime sound, release the button on the outdoor transmitter.
10. The indoor receiver will now play the chosen chime sound whenever the outdoor transmitter button is pressed.
Note: The SadoTech ST-FX-C Chimes Wireless Doorbells offer a selection of over 50 chime sounds to choose from, allowing you to customize the doorbell sound to your preference.
Add New Comment