How do I install the Plustek A320L Flatbed Scanner? (plustek A320L Flatbed Scanner User's Guide)

Answer

manuals.plus

Nov 04, 2024 - 07:30 PM

To install the Plustek A320L Flatbed Scanner on your computer, please follow these steps:

1. Ensure that your computer meets the system requirements specified in the user manual.

2. Connect the scanner to your computer using the provided USB cable. Make sure both ends of the cable are securely plugged in.

3. Plug in the power adapter to the scanner and connect it to a power source.

4. Turn on your computer and wait for it to fully boot up.

5. Insert the installation CD that came with the scanner into your computer's CD/DVD drive. If your computer doesn't have a CD/DVD drive, you can download the necessary software and drivers from the Plustek website.

6. Follow the on-screen instructions to install the scanner software and drivers. Make sure to select the correct operating system (Windows or Mac) during the installation process.

7. Once the installation is complete, restart your computer.

8. After the computer restarts, launch the scanner software. You can find the software either on your desktop or in the Start menu (Windows) or Applications folder (Mac).

9. The scanner software should detect the Plustek A320L Flatbed Scanner automatically. If not, make sure the scanner is powered on and properly connected to your computer.

10. You can now start using the Plustek A320L Flatbed Scanner to scan your documents and images. Refer to the user manual for instructions on how to use the scanner's features and settings.

Please note that the installation process may vary slightly depending on your computer's operating system and configuration. If you encounter any issues during the installation, refer to the troubleshooting section of the user manual or contact Plustek customer support for further assistance.