Answer
Nov 04, 2024 - 07:25 PM
To install the Xerox XDM6440 Duplex Document Scanner, follow these steps:
1. Ensure that your computer meets the minimum system requirements, which include having Windows 7 or later operating system.
2. Connect the scanner to your computer using the provided USB cable. Make sure both ends of the cable are securely plugged in.
3. Power on the scanner by connecting it to an external power source using the included power adapter. The scanner cannot be powered solely through the USB connection.
4. Once the scanner is powered on and connected to your computer, wait for the operating system to recognize the device. It may take a few moments for the necessary drivers to be installed.
5. If prompted, insert the installation CD that came with the scanner into your computer's CD/DVD drive. Follow the on-screen instructions to install any additional software or drivers.
6. If the scanner does not come with an installation CD or if your computer does not have a CD/DVD drive, you can download the necessary software and drivers from the Xerox website. Visit the Xerox support page for the XDM6440 scanner and locate the appropriate software and drivers for your operating system. Download and install them following the provided instructions.
7. Once the installation is complete, restart your computer to ensure all changes take effect.
8. Refer to the user guide for detailed instructions on how to use the scanner and its features effectively.
Note: It is always recommended to refer to the user guide or manual provided with the scanner for specific installation instructions and troubleshooting tips.
Add New Comment